How to Open CRW Files on a Mac (2026 Guide)

Short answer: most CRW files open in Preview with nothing to install, but files from four early PowerShots didn't open on macOS 27.0.1 in November 2026, and a ten-second check tells you which you have. A .CRW from an EOS D30, D60, 10D or 300D (Digital Rebel), or from a PowerShot G2, G3, G5, G6, Pro1, S30, S40, S60 or S70, opens on macOS 27.0.1 with the Mac's own RAW decoder, the one Preview, Photos and Quick Look share. A CRW from a PowerShot G1, Pro70, S45 or S50 does not, and renaming it or adding a sidecar won't change that; you need an app with its own decoder. We tested all 63 CRW and NRW files in the raw.pixls.us archive on macOS 27.0 on September 30, 2026, then reran the 51 CRW files on macOS 27.0.1 on November 4, 2026: the S30 and S40, which failed in September, now open. The per-camera results below are from the November run. For the format's history, read what a CRW file is; this page is about getting one open.

CRW in brief: Canon's first RAW format

CRW is Canon's first RAW format, written from the late 1990s to 2004 by the EOS D30, D60, 10D and 300D and by PowerShot compacts from the Pro70 and G1 through the G6, Pro1, S60 and S70. It uses Canon's own container rather than TIFF, and the camera usually saved a small .THM thumbnail beside each file. Two things trip people up: the EOS-1D and 1Ds of the same era wrote .TIF RAW files, not CRW, and from the EOS-1D Mark II and 20D in 2004 Canon moved to CR2, which the Mac's own decoder has read for years. The CRW format page covers editing; the full format list covers everything else.

Check your camera in ten seconds

Apple publishes a list of the RAW cameras macOS 27 supports (published October 30, 2026), but your Mac carries its own copy of that list, and the copy is the one that counts. Open Terminal (Applications, then Utilities) and paste this, replacing the camera name with yours:

system_profiler SPRawCameraDataType | grep -i "PowerShot G2:"

The first part prints every camera model your Mac's built-in RAW decoder knows; the second part filters it to your camera. Keep the colon after the model name: without it, a search for the G1 also finds the G10, G11, G12, G15, G16 and G1 X, later cameras the Mac does read. A line back means Preview, Photos and Quick Look will read the files. Nothing back means they won't. In our test on macOS 27.0.1 on November 4, 2026, this list predicted the result for all 17 CRW cameras: the 13 listed bodies all opened, the 4 unlisted ones all failed. Apple's web page, updated October 30, 2026, now matches on all 17 too, because it added the G2, S30 and S40. In our September 30 test on macOS 27.0 it got 16 of 17. The miss was the PowerShot G2, which opened at full size on our Mac and appeared in the Mac's own list, yet wasn't on Apple's web page for macOS 27 or any earlier version we parsed (a search for "G2" found only a Panasonic). Apple's macOS 26 page still lists none of those three, so trust the Terminal command over the web page.

Opening a supported CRW: Preview, Photos, Quick Look

If your camera passed the check, there is nothing to install. Double-click the .CRW to open it in Preview; if another app has claimed the extension, Control-click the file, choose Open With, then Preview. To keep the RAW and edit it non-destructively, drag it into Photos or choose File, then Import. To glance at it, select it in Finder and press Space.

What every CRW camera did on macOS 27

On macOS 27.0.1 on November 4, 2026, 13 of the 17 CRW cameras opened in the Mac's built-in RAW decoder, the one Preview and Photos use; four early PowerShots did not. On September 30, on macOS 27.0, it was 11 of 17: the S30 and S40 failed then. We ran all 21 genuine Canon CRW files in the raw.pixls.us archive through it. "Opens" means the decoder produced a full-size image twice over, byte for byte identical both times, and produced the same image again after we blanked every JPEG stored inside the file, so what you're seeing is a real RAW render and not the camera's preview in disguise.

CameraOpens with the Mac's decoder?On Apple's macOS 27 web list?JPEG stored inside the file
EOS D30Yes, 2160 × 1440Yes1440 × 960
EOS D60Yes, 3072 × 2048Yes2048 × 1360
EOS 10D (3 files)Yes, 3072 × 2048Yes1536 × 1024 or full size, varies by file
EOS 300D / Digital Rebel / Kiss Digital (3 files)Yes, 3072 × 2048Yes, under all three names1536 × 1024 to full size, varies by file
PowerShot G1NoNo640 × 480
PowerShot G2Yes, 2272 × 1704Yes, added October 30, 2026640 × 480
PowerShot G3Yes, 2272 × 1704Yes640 × 480
PowerShot G5Yes, 2592 × 1944Yes640 × 480
PowerShot G6Yes, 3072 × 2304Yes3072 × 2304, full size
PowerShot Pro1Yes, 3264 × 2448Yes640 × 480
PowerShot Pro70NoNoNone
PowerShot S30Yes, 2048 × 1536 (failed in September)Yes, added October 30, 2026640 × 480
PowerShot S40Yes, 2272 × 1704 (failed in September)Yes, added October 30, 2026640 × 480
PowerShot S45NoNo2272 × 1704, full size
PowerShot S50NoNo640 × 480
PowerShot S60Yes, 2592 × 1944Yes640 × 480
PowerShot S70Yes, 3072 × 2304Yes3072 × 2304, full size

Two patterns. Every EOS body opens, and the PowerShot line splits: the G1, Pro70, S45 and S50 fail, while the G2, G3, G5, G6, Pro1, S30, S40, S60 and S70 open. And a stored JPEG doesn't rescue a file the decoder rejects: the S45 carries a full-size 2272 × 1704 JPEG and still produced nothing in Preview's decoder or Quick Look. The PowerShot Pro90 IS also wrote CRW according to Adobe's camera table; it has no file in the archive and isn't on Apple's list, so treat it as untested rather than supported.

Finder's "Kind" label proves nothing

Select any .CRW, press Command-I, and Finder names a raw-image kind: "Canon CRW raw image" on a Mac with no other RAW app installed, or the label of whichever RAW app has claimed the extension (on our Mac, which has Lightroom, "RAW photo file"). It gave that label to all 51 .CRW files in the archive: the 21 genuine ones, including the four the decoder can't read, and 30 files that weren't Canon RAW at all (more on those next). The kind comes from the extension and nothing else. What does tell you something is Quick Look: every file the Mac could decode produced a preview at every size we asked for, and every file it couldn't produced none at all. In our test the preview process hung on those files until we stopped it, so expect generic icons for a folder of unsupported CRWs; that is the decoder declining the files, not a damaged card.

The CHDK trap: a .CRW that was never a Canon RAW

Of the archive's 51 .CRW files, only 21 are Canon RAW files. The other 30 came from CHDK, a free add-on firmware for PowerShot compacts. 29 of them are raw sensor dumps (one of them compressed) saved with a .CRW extension, carrying none of the data Mac apps need to identify a RAW file, and none of the 29 opened on macOS 27. Finder still gives every one of them the same raw-image label. The thirtieth file was a DNG that CHDK had saved with a .CRW extension, and it opened fine, because macOS read the contents and found a DNG. If your PowerShot A-series or IXUS shot RAW, it did so through CHDK, and the same goes for most SX models; only the SX1 IS and the SX50, SX60 and SX70 HS write RAW on their own, as CR2. CHDK can save DNG instead, which is what that thirtieth file proves, and a DNG opens on a Mac without extra software; for the dumps you already have, you need an app with its own decoder, and even then expect the odd refusal: the only .CRW files in the archive that RevelRaw can't open are three of these dumps.

When a CRW won't open: what actually works

First, what doesn't. Renaming does nothing. On macOS 27.0.1 in November 2026 we copied the G1 and S45 files under ten extensions, including .CR2, .NEF and .DNG, and every copy failed, as the G1 and S30 copies had in September on macOS 27.0. The S30 copies all opened in November, as the untouched file now does. The reverse proved the point: the D60 file opened identically as .crw, .CR2, .DNG, .jpg and with no extension at all, because macOS recognizes a genuine CRW by its contents. The .THM sidecar does nothing either. We placed one next to a CRW and both the decoder's output and the Quick Look thumbnail were byte-identical with and without it; macOS has no registered type for .THM. So skip the file surgery and pick an app that reads the camera. If your problem doesn't match anything here, the cross-format RAW troubleshooting guide walks through the other causes.

RevelRaw, for the PowerShots the Mac can't read

RevelRaw is our native macOS editor. It tries the Mac's built-in decoder first and, when that declines, hands the file to a second decoder built into the app. In the app's sweep of the same archive on September 21, 2026, RevelRaw opened every genuine Canon CRW, including the six PowerShots macOS couldn't read at that time; the only .CRW files it couldn't open were three CHDK dumps. Files from the G1, Pro70, S45 and S50, which macOS still can't read, edit normally with one gap. The Kelvin white-balance controls (Auto, As Shot, temperature) are switched off for a file the second decoder opened, while the Warmth and Cast sliders still work. On macOS 27.0.1 the S30 and S40 use the Mac's decoder, so Kelvin works on them too. And no CRW gets an automatic lens profile on a Mac, whichever decoder opens it, so the manual distortion, chromatic aberration and vignetting sliders are what you get either way. Exposure, tone curve, color and the preset ranking from AI scene detection all work as usual, though the second decoder keeps less highlight headroom than the Mac's own, so a first render can look a little darker. Everything runs on your Mac and nothing is uploaded. It's free to download with one free full-quality export, on macOS 26 or later with an Apple M1 or later.

Canon's own software, for the EOS bodies only

Canon's Digital Photo Professional 4 manual lists .CRW among the RAW extensions it reads and names the EOS D30, D60, 10D and 300D among its compatible cameras. Its PowerShot list starts at the G9, a CR2 body, so no CRW-era PowerShot is covered. DPP 4.22.10 for macOS, released October 2026, lists macOS 14, 15 and 26 and not yet macOS 27, and the download page asks for a Canon camera serial number. For an old EOS archive it is the maker's own converter; for a PowerShot it adds nothing.

Adobe, and the DNG route into Preview

Adobe's Camera Raw supported-cameras table (last updated September 29, 2026) lists every CRW body, all supported since the earliest Camera Raw releases, so Lightroom, Lightroom Classic and Photoshop all open them. The same table backs Adobe's free DNG Converter, which turns a CRW into a DNG; macOS reads DNG, so this is the no-subscription way to get a G1 or S45 file into Preview and Photos. Our DNG guide covers what to expect from the result. darktable 5.6.2 covers most of them: its camera-support table lists 16 of the 17 CRW cameras tested here, all but the PowerShot Pro70 (the Pro90 IS is missing too), and shows no white-balance presets or noise profiles for the EOS D30 or the PowerShot G1 and S40.

Converting a CRW to JPEG

For a camera the Mac reads, open the CRW in Preview and choose File, then Export, then JPEG; for the rest, export from whichever app above opens it. For a whole folder, open the CRWs together in Preview, select them all in the sidebar and export in one pass. For the PowerShots the Mac can't read, convert to DNG with Adobe's free DNG Converter first, then export from Preview. Either way, keep the original CRWs: a JPEG bakes in one rendering, and the RAW lets you redo it. The edit-first, export-last version of all this is in our RAW to JPEG guide.

How we tested

On September 30, 2026 we downloaded all 63 CRW and NRW files in the raw.pixls.us archive, checksums verified, onto a MacBook Pro running macOS 27.0 (build 26A428). Each file went through the Mac's built-in RAW decoder twice, through Quick Look at 256, 1024 and 3000 pixels, through exiftool for metadata and stored JPEGs, and through the decoder again with every stored JPEG blanked out; we also renamed files, added a sidecar, and dumped the Mac's supported-camera list with the Terminal command above. On November 4, 2026 we repeated those tests on all 51 CRW files, checksums verified again, on the same Mac running macOS 27.0.1 (build 26A434); the table and camera counts on this page come from that rerun. 22 of the files are under a non-commercial license and were used for local testing only; if you want a CRW to try yourself, our own CC0 sample-RAW set includes an EOS D60 file. Limits: one Mac, one macOS build per run, mostly one file per camera, and Preview and Photos exercised through the decoder they share rather than clicked by hand. The Nikon NRW half of the same test has its own guide.

FAQ

Can Preview open CRW files?

For most CRW cameras, yes. In our test of every CRW file in the raw.pixls.us archive on macOS 27.0.1 in November 2026, files from the EOS D30, D60, 10D and 300D and from the PowerShot G2, G3, G5, G6, Pro1, S30, S40, S60 and S70 opened at full size with the Mac's built-in decoder, the one Preview uses. Files from the PowerShot G1, Pro70, S45 and S50 did not, and no renaming or sidecar changed that.

Why won't my CRW files open on my Mac?

Usually because the Mac's built-in RAW decoder never learned that camera. In our November 2026 test the PowerShot G1, Pro70, S45 and S50 all failed on macOS 27.0.1, and none of them appears in the Mac's own supported-camera list. The S30 and S40 failed too in September on macOS 27.0, but opened in November and are in that list now. The files are fine: an app with its own decoder, such as RevelRaw or Adobe Camera Raw, opens them (darktable's table lists all but the Pro70), and Adobe's free DNG Converter can turn them into DNGs that Preview reads. A CRW from a PowerShot not named on this page is most likely a CHDK sensor dump, which no built-in Mac app opens.

Finder says my CRW is a raw image. Doesn't that mean it will open?

No. On macOS 27.0.1, Finder labeled all 51 .CRW files in our test the same raw-image kind, including the four PowerShot files the Mac can't decode and 30 files that weren't Canon RAW at all. The label comes from the extension alone. The only signs that count are a Quick Look preview when you press Space and the file opening in Preview.

Can I rename a .CRW to .CR2 or .DNG so it opens?

No. On macOS 27.0.1 in November 2026 we renamed a PowerShot G1 and a PowerShot S45 file to ten different extensions, including .CR2, .NEF and .DNG, and every copy failed, as the G1 and S30 copies had in September on macOS 27.0. The reverse is also true: a CRW the Mac supports opened identically under every name we tried, even .jpg, because macOS recognizes a genuine CRW by its contents, not its extension.

What is the .THM file next to my CRW?

A small JPEG thumbnail the camera saved beside each CRW under the same name, such as CRW_1834.THM. macOS ignores it: in our test, adding one next to a CRW changed neither the Mac's rendering nor the Quick Look thumbnail. Keep it with the CRW when you copy or archive the folder; it takes almost no space.

Does Canon's Digital Photo Professional still open CRW files?

Partly. Canon's DPP 4 manual lists .CRW among the RAW extensions it reads and names the EOS D30, D60, 10D and 300D as compatible cameras, but its PowerShot list starts at the G9, so no CRW-era PowerShot is included. DPP 4.22.10 for macOS, released October 2026, lists macOS 14, 15 and 26, not 27, and the download asks for a Canon camera serial number.

Can Photoshop or Lightroom open CRW files?

Yes. Adobe's Camera Raw supported-cameras table, updated September 2026, lists every CRW body, all supported since the earliest Camera Raw releases, and Camera Raw is what Photoshop, Lightroom and Lightroom Classic use. Adobe's free DNG Converter reads the same list, so you can also convert a CRW to DNG and open that anywhere.

Related reading: What is a CRW file? · How to open CR2 files on a Mac · Canon RAW editing on a Mac · How to open RAW files on a Mac (any camera)